All Water Softeners requires Salt to regenerate. The Resin of any Water Softener cleans and activates itself by exchanging ions with NaCl Tablets. If you are using a Manual Water Softener, you regenerate it by yourself so you are always aware when there is no Salt in Brine Tank and you can refill the brine tank with salt upon sufficient depletion of salt in it.
Most of the time, certainly in Automatic Water Softeners, there are high chances of salt getting depleted and you might be unaware of when to refill the brine tank with salt because the regeneration is automatic and the salt in brine tank is getting consumed regularly. If there is no salt in Brine Tank and regeneration occurs, the Resin Beads cannot activate themselves for further softening of your Hard Water.
Before the invention of Low Salt Alarm, the only way to know when Salt has to be refilled in brine tank was either to check it by visiting the Water Softener and opening its brine tank and manually check or when the water starts to become hard again and you feel uncomfortable of the hardness again.
This is where Purity Hub invented a Low Salt Alarm that informs you by buzzer when the Salt is only left for 2 more successful regenerations and you do not need to visit terrace regularly to keep a watch on salt depletion.
Purpose
Purity Hub is committed to offer their clients with best automation. Purity Hub's Patented Low Salt Alarm has automated the manual checking of salt levels in brine tank. Mostly, clients being old age cannot manage to visit terrace regularly for Salt checking and with the help of Low Salt Alarm Device, anyone can easily get an alarm when there is less amount of salt remained in brine tank.
Also, Regenerating Water Softener for longer time with no salt creates a layer of hardness on resin beads that ultimately reduces the life of resin beads so by using the Low Salt Alarm, you are not only aware of Salt Levels but you are also increasing the overall life of Resin inside your Water Softener.
How It Works
With every Purity Hub's Automatic Water Softener, there comes a Low Salt Alarm and its fittings. The buzzer is provided with an On-Off switch. Whenever you listen the alarm is buzzing, you need to inform your Purity Hub Service Partner for a Salt Refill and meanwhile you can switch off the alarm. Once the salt is refilled, the sensors connected gets to know the Salt has been replenished and they would not send any further command to buzzer. Now you can turn on the switch to On Position so whenever again the salt is depleted, again the sensors can give a low salt signal.
Here is a list of all water softeners that has inbuilt lo salt alarm technology by Purity Hub.
Share to friends:
